Assembling flashlight with The LITE LIGHT:

• Back off the hand nut/magazine cap until threads are engaged less than ½ turn.
• Lightly lubricate internal O-ring and flashlight. Push the flashlight into the body until it hits the bottom of The LITE LIGHT, taking care that the O-ring stays in position.
• Tighten the hand nut/magazine cap securely.

Installation: Remington 870, Mossberg 835, Winchester Models

• Remove magazine cap and spring retainer.
• Insert assembled LITE LIGHT, tighten, and reassemble as per factory instructions.
• To maintain shell restriction, use a 5/16 x 24 bolt of appropriate length and a 5/16 x 24 nut to secure it in place. (Bolt and nut not included)

Installation: Remington Universal

• Remove magazine cap.
• Install assembled LITE LIGHT, tighten, and reassemble as per factory instructions.

Installation: Mossberg 500

• Remove barrel bolt and barrel assembly.
• Remove barrel bolt from barrel. Replace barrel bolt with The LITE LIGHT assembly and reassemble as per factory instructions.

ALWAYS CHECK LOCAL REGULATIONS BEFORE USE!